Rockwool vs Glasswool for Commercial Buildings: Technical Differences That Drive Material Selection

Why Acoustic Material Selection Cannot Be Based on Price Alone

When a contractor or building manager builds a bill of quantities for acoustic work, the strongest pull is toward the lowest price per square meter. Rockwool at 40 kg/m3 density costs less than the 80 kg/m3 version, and Glasswool at 16 kg/m3 is significantly cheaper than any Rockwool grade. Without a technical specification to check against, purchasing decisions almost always default to the cheapest material.

The problem is that the wrong density means the target dB reduction will not be met. Material weight that was not factored in from the start can exceed the load capacity of an existing ceiling frame. And in a multi-storey building, material with a low melting point may fail to satisfy the fire rating written into the building documents.

Both Rockwool and Glasswool are valid acoustic materials for buildings. Neither is unconditionally better than the other. The difference lies in the scenarios where each one performs. The sections below cover the technical parameters that separate them and the site conditions that determine which choice holds up.

What Are the Main Technical Differences Between Rockwool and Glasswool?

Rockwool is made from slag or basalt with a density of 40-100 kg/m3 and heat resistance above 1000 degrees Celsius, making it the primary choice for spaces with high fire rating requirements and low-frequency sound sources such as generators. Glasswool is made from glass fiber at 10-32 kg/m3 density, lighter and more economical, suited to load-limited ceilings and echo reduction in offices or conference rooms. Both materials can reach an NRC above 0.85 at the right thickness, but low-frequency performance and structural load differ significantly between them.

The technical parameters that matter at the building level are as follows:

  1. Raw material: Rockwool is produced from melted industrial slag or basalt rock, spun into fibers. Glasswool uses recycled glass fiber as its primary input. This difference in raw material directly determines the melting point and fiber characteristics of each product.
  2. Typical density: Rockwool for wall and ceiling applications in buildings is generally available in the 40-100 kg/m3 range. Glasswool sits in the 10-32 kg/m3 range for the same applications. Density is not just a weight figure. It determines how many fibers per unit volume are available to absorb sound energy.
  3. Melting point: Rockwool exceeds 1000 degrees Celsius. Glasswool is in the 450-500 degree Celsius range. This difference directly affects whether a material can be included in a fire rating calculation for partitions in a multi-storey building under the applicable standard.
  4. NRC: Both materials can reach NRC 0.90 or above at the right thickness. At the same thickness, however, high-density Rockwool generally performs better at low frequencies below 500 Hz, which is the dominant frequency range for heavy machinery and building mechanical systems.
  5. Weight: Glasswool is lighter per square meter. This is directly relevant when an existing ceiling frame has limited load capacity and cannot take additional heavy material without a structural recalculation.

Technical references for the application of both materials in commercial buildings are available at Rockwool for building and construction and Isover for commercial buildings.

When Is Rockwool the Better Choice for a Building?

There are three scenarios where Rockwool is consistently the more defensible technical choice.

First, generator rooms and plant rooms. Generators produce noise dominated by low frequencies, 100-250 Hz, depending on the number of cylinders and engine speed. Low frequencies require material with high density and sufficient mass to resist the energy of sound waves traveling both through air and through structure. Low-density Glasswool does not have enough mass for this job. For generator room and AHU acoustic treatment, Rockwool at 60-80 kg/m3 density is a common starting point, though the exact figure must be confirmed after a site survey.

References from plant control room projects show that combining high-density material in the primary insulation layer with treatment of flanking paths through floor and wall structure produces meaningful reductions compared to addressing only the wall layer without calculating vibration transmission routes.

Second, inter-room partitions in multi-storey buildings that require a 1-2 hour fire rating. With a melting point above 1000 degrees Celsius, Rockwool is easier to include in a partition fire rating calculation than Glasswool. This is not a matter of aesthetic preference. It is a matter of building certification documents that must be accountable to building authorities and building insurers. See the product specifications available on our Rockwool distribution page.

Third, auditoriums and multipurpose halls that require consistent NRC across the full frequency range. For auditorium and multipurpose hall acoustics, the target reverberation time (RT60) is usually fixed in the acoustic design before construction begins. High-density Rockwool on the ceiling and side walls delivers a more stable absorption coefficient at low and mid frequencies than low-density Glasswool.

One installation constraint to flag: Rockwool is heavier per square meter. Installing it on high ceilings requires a stronger support frame, and this must be accounted for at the design stage, not added after work has started. Contractors who do not calculate this load from the beginning frequently encounter frame deflection problems or loose installation because the material is too heavy for the existing suspension system.

When Is Glasswool the Better Choice for a Building?

Glasswool is the better choice when the ceiling structure cannot carry heavy loads, as is common in office buildings or apartments with existing hollow or metal furring frames. For acoustic targets focused on echo reduction or RT60 control rather than full inter-room isolation, Glasswool at 24-32 kg/m3 density is sufficient and more cost-efficient. Installation must be tight with no voids, because this material folds easily when fitted at height, and even a small gap will drop actual performance well below the rated specification.

Three concrete scenarios where Glasswool is the more practical choice:

  • Ceilings in office buildings and apartments with existing hollow or metal furring frames that have limited load capacity. Adding high-density Rockwool in these situations requires a structural recalculation and possibly a full frame replacement, a cost that can exceed the price difference between the two materials.
  • Workspaces and conference rooms targeting RT60 reduction rather than full isolation between adjoining spaces. For office workspace acoustics, the primary goal is usually speech clarity and reduced sound reflection, not blocking noise from the room next door. Glasswool at 24-32 kg/m3 density and the appropriate thickness meets this target.
  • Projects with tight material budgets and a moderate dB reduction target. If the target can be met with correctly installed Glasswool, there is no technical reason to specify high-density Rockwool with its greater weight and higher unit cost.

An installation risk that is frequently overlooked: Glasswool folds and compresses more easily than the stiffer Rockwool when installed at height. When it folds, voids form inside the insulation layer and actual NRC performance drops well below the rated value. See our Glasswool specifications for available density and thickness options.

Rockwool vs Glasswool Comparison Table for Building Applications

The table below summarizes the key technical parameters. Pricing is not given as a fixed figure because it depends on the specific density, the total area, and existing site conditions.

ParameterRockwoolGlasswool
Raw materialIndustrial slag or basalt rockRecycled glass fiber
Typical density40-100 kg/m310-32 kg/m3
Melting pointAbove 1000 degrees Celsius450-500 degrees Celsius
Weight per m2 (average)Heavier, frame load calculation requiredLighter, compatible with existing frames
Low-frequency performanceSuperior at high densityLimited at low density
Installation stability at heightStiffer, more stable during installationFolds more easily, higher void risk
Relative costHigher per m2 at equivalent densityMore economical at low density
Suited forGenerator rooms, plant rooms, auditoriums, fire-rated partitionsOffice ceilings, apartments, conference rooms

Common Mistakes When Selecting Acoustic Material Without a Technical Specification

The most frequent field error: a non-specialist contractor installs Glasswool at 16 kg/m3 density in a generator room because it is cheaper and easier to source. The noise reduction falls well short of the target. The client raises a complaint. The work is stripped out and redone, this time at a cost that includes demolition of the original material, disposal, and reinstallation with the material that should have been specified from the start.

The opposite mistake also occurs: Rockwool at 80 kg/m3 density is installed in a standard office ceiling because the contractor used a generator room specification as the reference. The result is excessive load on the ceiling frame, material costs far above what the application requires, and acoustic performance no better than what Glasswool at 32 kg/m3 would have delivered.

Correct material selection starts with three questions:

  1. What is the sound source, and what is its dominant frequency range in Hz?
  2. What is the target dB reduction or RT60 that must be achieved?
  3. What are the existing construction conditions, including frame load capacity and the fire rating requirements that apply?

Without answers to these three questions, comparing material prices across contractors is meaningless because the items being compared are not equivalent.

Four Steps to Identify the Right Material Before Writing a Project Specification

These four steps apply before any material name or thickness figure goes into a project specification:

  1. Identify the sound source and its dominant frequency. A diesel engine runs at a different frequency than an HVAC system, and both differ from human speech in a conference room. The dominant frequency determines the minimum density required.
  2. Set the target dB reduction or RT60. This target differs for every room function. A generator room in a residential area has a different noise threshold than one in an industrial zone. An auditorium for music performance needs a different RT60 than a hall used for spoken presentations.
  3. Check the load capacity of the existing structure. This is especially relevant for work in existing buildings. An existing ceiling frame may not have been designed to carry additional heavy material, and adding Rockwool without this check can create structural problems later.
  4. Confirm the applicable fire rating requirements. Building documents, particularly for multi-storey buildings, typically state fire rating requirements for partitions and ceilings. This must be checked before the material is selected, not after.

Site surveys for the Jabodetabek area are available at no cost, including baseline noise measurement and inspection of existing construction. From the survey results, a specific recommendation covering material combination, density, and thickness can be prepared and included in a written quotation. For locations outside Jabodetabek, surveys are still available with mobilization costs stated openly in the quotation.

FAQ: Rockwool and Glasswool for Building Projects

Can Rockwool and Glasswool be installed together in the same wall or ceiling assembly?

Yes, and combining both materials is sometimes used to optimize performance across a wider frequency range. High-density Rockwool in the outer layer handles low frequencies and meets fire rating requirements, while Glasswool in the inner layer absorbs mid and high frequencies. This combination must be engineered to a specific dB target and existing construction conditions, not chosen arbitrarily.

What thickness of Rockwool is needed for a generator room?

There is no single figure that applies to every case. Thickness depends on generator output in kVA, the dominant machine frequency, existing wall construction, and the target dB reduction. As a starting point, Rockwool at 60-80 kg/m3 density and 50-100 mm thickness is commonly used, but the exact specification must be confirmed after a site survey and baseline noise measurement.

Is Glasswool safe to use in a multi-storey building that requires a fire rating?

Glasswool is non-combustible, but its melting point is around 450-500 degrees Celsius, which is lower than Rockwool, which exceeds 1000 degrees Celsius. For partitions requiring a 1-hour or greater fire rating as specified in multi-storey building standards, Rockwool is generally the safer choice and easier to certify. Check the fire rating requirements in the building documents before selecting a material.

Why does installed acoustic material fail to meet its rated specification?

The most common cause is voids in the installation, particularly at joints, corners, and cable or pipe penetrations. Material rated at NRC 0.90 installed with gaps covering 10 percent of the surface area can lose 30 percent of its effectiveness. Other causes include material density that does not match the specification, flanking paths through structure that have not been addressed, and using airborne sound-damping material for a problem that is transmitted through the structure.

How do I get the right acoustic material recommendation for a building project in Jabodetabek?

The most efficient step is a site survey to measure baseline noise conditions and inspect existing construction. Dewa Peredam Ruangan provides free surveys in the Jabodetabek area. From the survey results, a specific recommendation covering material combination, thickness, and density can be prepared and included in a written quotation. For locations outside Jabodetabek, surveys are still available with mobilization costs stated openly in the quotation.

Discuss Your Project’s Acoustic Material Requirements

Choosing between Rockwool and Glasswool cannot be resolved by comparing price per roll. Density, melting point, structural load capacity, and fire rating requirements all determine whether the selected material will reach its acoustic target.

If you are preparing a specification for a building project, whether for a generator room, auditorium, conference room, or office ceiling, a site survey is the most productive first step. From there, a written quotation with accountable material specifications can be prepared.

Submit your acoustic material requirements through the form here.

Rockwool vs Glasswool untuk Gedung: Perbedaan Teknis yang Menentukan Pilihan Material Akustik

Mengapa Pemilihan Material Akustik Gedung Tidak Bisa Hanya Berdasarkan Harga

Ketika kontraktor atau building manager menyusun bill of quantity untuk pekerjaan akustik, godaan terbesar adalah memilih material berdasarkan harga per meter persegi. Rockwool density 40 kg/m3 dijual lebih murah dari density 80 kg/m3, dan Glasswool density 16 kg/m3 jauh lebih ekonomis dari Rockwool mana pun. Jika tidak ada spesifikasi teknis yang diperiksa, keputusan pembelian hampir selalu jatuh ke material termurah.

Masalahnya, density yang salah berarti target penurunan dB tidak tercapai. Beban material yang tidak diperhitungkan sejak awal bisa melebihi kapasitas rangka plafon eksisting. Dan di gedung bertingkat, material dengan titik leleh rendah bisa gagal memenuhi syarat fire rating yang tercantum dalam dokumen bangunan.

Rockwool dan Glasswool keduanya valid sebagai material akustik gedung, bukan satu lebih baik dari yang lain secara absolut. Perbedaannya ada pada skenario penggunaannya. Bagian berikut menjelaskan parameter teknis yang membedakan keduanya dan kondisi lapangan yang menentukan pilihan mana yang lebih tepat.

Apa Perbedaan Utama Rockwool dan Glasswool secara Teknis?

Rockwool terbuat dari slag atau basalt dengan density 40-100 kg/m3 dan tahan panas hingga lebih dari 1000 derajat Celsius, menjadikannya pilihan utama untuk ruang dengan syarat fire rating tinggi dan sumber suara frekuensi rendah seperti genset. Glasswool terbuat dari serat kaca dengan density 10-32 kg/m3, lebih ringan, dan lebih ekonomis, cocok untuk plafon berbeban terbatas dan pengurangan gema di ruang kerja atau konferensi. Keduanya bisa mencapai NRC di atas 0.85 pada ketebalan yang tepat, tetapi performa di frekuensi rendah dan beban struktur berbeda secara signifikan.

Berikut rincian parameter teknis yang relevan untuk keputusan di tingkat gedung:

  1. Bahan baku: Rockwool diproduksi dari slag industri atau batuan basalt yang dilelehkan, kemudian dipintal menjadi serat. Glasswool menggunakan serat kaca daur ulang sebagai bahan utama. Perbedaan bahan baku ini langsung menentukan titik leleh dan karakteristik serat.
  2. Density tipikal: Rockwool untuk aplikasi dinding dan plafon gedung umumnya tersedia di rentang 40-100 kg/m3. Glasswool berada di rentang 10-32 kg/m3 untuk aplikasi serupa. Density bukan sekadar angka berat, ia menentukan berapa banyak serat per volume yang tersedia untuk menyerap energi suara.
  3. Titik leleh: Rockwool melampaui 1000 derajat Celsius, sedangkan Glasswool berada di kisaran 450-500 derajat Celsius. Perbedaan ini langsung memengaruhi apakah material bisa disertakan dalam kalkulasi fire rating partisi gedung bertingkat sesuai standar yang berlaku.
  4. NRC: Kedua material bisa mencapai NRC 0.90 atau lebih pada ketebalan yang tepat. Namun pada ketebalan yang sama, Rockwool density tinggi umumnya lebih unggul di frekuensi rendah (di bawah 500 Hz), yang menjadi frekuensi dominan mesin berat dan sistem mekanikal gedung.
  5. Bobot: Glasswool lebih ringan per meter persegi, faktor yang langsung relevan ketika rangka plafon eksisting memiliki beban terbatas dan tidak memungkinkan penambahan material berat tanpa perhitungan struktural ulang.

Referensi teknis mengenai aplikasi kedua material di bangunan komersial dapat diperiksa pada halaman Rockwool untuk konstruksi bangunan dan Isover untuk bangunan komersial.

Kapan Rockwool Menjadi Pilihan yang Lebih Tepat untuk Gedung?

Ada tiga skenario di mana Rockwool secara konsisten menjadi pilihan yang lebih dapat dipertahankan secara teknis.

Pertama, ruang genset dan ruang mesin. Genset menghasilkan kebisingan yang didominasi frekuensi rendah, 100-250 Hz, bergantung pada jumlah silinder dan kecepatan putaran mesin. Frekuensi rendah membutuhkan material dengan density tinggi dan massa yang cukup untuk menahan energi gelombang suara yang merambat, baik lewat udara maupun lewat struktur. Glasswool density rendah tidak punya massa yang cukup untuk pekerjaan ini. Untuk penanganan akustik ruang genset dan AHU, Rockwool density 60-80 kg/m3 adalah titik awal yang umum, meskipun angka pasti harus dikonfirmasi setelah survei lapangan.

Referensi dari proyek ruang kontrol mesin menunjukkan bahwa kombinasi material dengan density tinggi di lapisan insulasi primer, dilengkapi dengan penanganan flanking path lewat struktur lantai dan dinding, menghasilkan penurunan yang bermakna dibanding hanya mengandalkan lapisan dinding tanpa perhitungan jalur rambatan getaran.

Kedua, partisi antar ruang di gedung bertingkat yang mensyaratkan fire rating 1-2 jam. Rockwool dengan titik leleh di atas 1000 derajat Celsius lebih mudah masuk dalam kalkulasi fire rating partisi dibanding Glasswool. Ini bukan soal preferensi estetika, ini soal dokumen sertifikasi bangunan yang harus dipertanggungjawabkan kepada otoritas bangunan dan asuransi gedung. Lihat spesifikasi produk yang tersedia di halaman distribusi Rockwool kami.

Ketiga, auditorium dan aula serbaguna yang menuntut konsistensi NRC di seluruh rentang frekuensi. Untuk akustik auditorium dan aula serbaguna, target waktu dengung (RT60) biasanya sudah ditetapkan dalam desain akustik sebelum konstruksi dimulai. Rockwool density tinggi di plafon dan dinding samping memberikan koefisien absorpsi yang lebih stabil di frekuensi rendah dan menengah dibanding Glasswool density rendah.

Catatan instalasi yang perlu diperhatikan: Rockwool lebih berat per meter persegi. Pemasangan di plafon tinggi membutuhkan rangka penopang yang lebih kuat, dan ini harus diperhitungkan sejak tahap desain, bukan ditambahkan saat pekerjaan sudah berjalan. Kontraktor yang tidak memperhitungkan beban ini sejak awal sering menghadapi masalah defleksi rangka atau pemasangan yang tidak rapat karena material terlalu berat untuk ditopang dengan sistem gantung yang ada.

Kapan Glasswool Menjadi Pilihan yang Lebih Tepat untuk Gedung?

Glasswool lebih tepat dipilih ketika struktur plafon tidak memungkinkan beban berat, seperti pada gedung perkantoran atau apartemen dengan rangka hollow eksisting. Untuk target akustik berupa pengurangan gema atau RT60, bukan isolasi penuh antar ruang, Glasswool density 24-32 kg/m3 sudah cukup dan lebih efisien secara biaya. Namun instalasi harus rapat tanpa void, karena material ini mudah terlipat saat dipasang di ketinggian dan celah sekecil apapun langsung menurunkan performa aktual jauh di bawah nilai spesifikasi.

Tiga skenario konkret di mana Glasswool menjadi pilihan yang lebih masuk akal:

  • Plafon gedung perkantoran dan apartemen dengan rangka hollow atau metal furring eksisting yang memiliki kapasitas beban terbatas. Menambahkan Rockwool density tinggi di sini membutuhkan perhitungan struktural ulang dan kemungkinan penggantian rangka, yang biayanya bisa melampaui selisih harga material.
  • Ruang kerja dan ruang konferensi yang mengejar pengurangan RT60, bukan isolasi penuh antar ruang. Untuk akustik ruang kerja gedung perkantoran, target utamanya biasanya kejelasan komunikasi dan pengurangan pantulan suara, bukan menahan bunyi dari ruangan tetangga. Glasswool density 24-32 kg/m3 dengan ketebalan yang sesuai sudah memenuhi target ini.
  • Proyek dengan anggaran material ketat dan target penurunan dB yang moderat. Jika target cukup diselesaikan dengan Glasswool yang dipasang dengan benar, tidak ada alasan teknis untuk memilih Rockwool density tinggi yang bobotnya lebih besar dan harganya lebih tinggi.

Peringatan instalasi yang sering diabaikan: Glasswool lebih mudah terlipat dan rusak saat dipasang di ketinggian dibanding Rockwool yang lebih kaku. Jika terlipat, void terbentuk di dalam lapisan insulasi dan performa aktual turun jauh di bawah nilai NRC spesifikasi. Lihat spesifikasi Glasswool yang kami sediakan untuk referensi density dan ketebalan yang tersedia.

Tabel Perbandingan Rockwool vs Glasswool untuk Aplikasi Gedung

Tabel berikut merangkum parameter teknis utama. Harga tidak dicantumkan dalam angka pasti karena bergantung pada density spesifik, luas area, dan kondisi bangunan yang ada.

ParameterRockwoolGlasswool
Bahan bakuSlag industri atau batuan basaltSerat kaca daur ulang
Density tipikal40-100 kg/m310-32 kg/m3
Titik lelehLebih dari 1000 derajat Celsius450-500 derajat Celsius
Bobot per m2 (rata-rata)Lebih berat, perlu perhitungan rangkaLebih ringan, cocok untuk rangka eksisting
Kekuatan di frekuensi rendahLebih unggul pada density tinggiLebih terbatas pada density rendah
Kemudahan instalasi di ketinggianLebih kaku, lebih stabil saat dipasangLebih mudah terlipat, risiko void lebih tinggi
Harga relatifLebih tinggi per m2 untuk density setaraLebih ekonomis untuk density rendah
Cocok untukRuang genset, mesin, auditorium, partisi fire ratingPlafon kantor, apartemen, ruang konferensi

Kesalahan Umum Saat Memilih Material Akustik Tanpa Spesifikasi Teknis

Kesalahan yang paling sering ditemui di lapangan: kontraktor non-spesialis memasang Glasswool density 16 kg/m3 di ruang genset karena lebih murah dan lebih mudah didapat. Hasilnya, penurunan kebisingan jauh di bawah target. Klien komplain. Pekerjaan harus dibongkar dan diulang, dengan biaya yang kali ini memperhitungkan pembongkaran material lama, pembuangan, dan pemasangan ulang dengan material yang seharusnya dipakai dari awal.

Kesalahan sebaliknya juga terjadi: Rockwool density 80 kg/m3 dipasang di plafon ruang kantor biasa karena kontraktor menggunakan spesifikasi ruang genset sebagai acuan. Hasilnya adalah beban berlebih pada rangka plafon, biaya material yang jauh melebihi kebutuhan aktual, dan performa akustik yang tidak berbeda bermakna dibanding jika menggunakan Glasswool density 32 kg/m3.

Pemilihan material yang benar harus dimulai dari tiga pertanyaan:

  1. Apa sumber suara, dan frekuensi dominannya di rentang berapa Hz?
  2. Berapa target penurunan dB atau RT60 yang harus dicapai?
  3. Apa kondisi konstruksi yang sudah ada, termasuk kapasitas beban rangka dan syarat fire rating yang berlaku?

Tanpa menjawab ketiga pertanyaan ini, perbandingan harga material antar kontraktor menjadi tidak bermakna karena yang dibandingkan bukan hal yang setara.

Langkah Menentukan Material yang Tepat Sebelum Menyusun Spesifikasi Proyek

Panduan empat langkah berikut berlaku sebelum nama material atau angka ketebalan masuk ke dalam spesifikasi proyek:

  1. Identifikasi sumber suara dan frekuensi dominannya. Mesin diesel berputar di frekuensi berbeda dibanding sistem HVAC, dan keduanya berbeda dari keramaian manusia di ruang konferensi. Frekuensi dominan menentukan density minimum yang dibutuhkan.
  2. Tentukan target penurunan dB atau RT60. Target ini berbeda untuk setiap fungsi ruang. Ruang genset di area residensial memiliki ambang batas yang berbeda dari ruang genset di kawasan industri. Auditorium untuk pertunjukan musik membutuhkan RT60 yang berbeda dari aula untuk presentasi verbal.
  3. Periksa kapasitas beban struktur yang ada. Ini berlaku terutama untuk pekerjaan di gedung yang sudah berdiri. Rangka plafon eksisting mungkin tidak dirancang untuk menambah beban material berat, dan menambahkan Rockwool tanpa verifikasi ini bisa menghasilkan masalah struktural di kemudian hari.
  4. Cek syarat fire rating yang berlaku. Dokumen bangunan, terutama untuk gedung bertingkat, biasanya mencantumkan persyaratan fire rating untuk partisi dan plafon. Ini harus diperiksa sebelum material dipilih, bukan setelah.

Survei lapangan untuk wilayah Jabodetabek tersedia tanpa biaya, termasuk pengukuran baseline kebisingan dan pemeriksaan konstruksi yang sudah ada. Dari hasil survei, rekomendasi kombinasi material, density, dan ketebalan dapat disusun secara spesifik dan dicantumkan dalam penawaran tertulis. Untuk lokasi di luar Jabodetabek, survei tetap dapat dilakukan dengan biaya mobilisasi yang dicantumkan terbuka di dalam penawaran.

FAQ: Rockwool dan Glasswool untuk Proyek Gedung

Apakah Rockwool dan Glasswool bisa dipasang bersamaan dalam satu konstruksi dinding atau plafon?

Bisa, dan kombinasi keduanya kadang digunakan untuk mengoptimalkan performa di rentang frekuensi yang lebih luas. Rockwool density tinggi di lapisan luar menahan frekuensi rendah dan memenuhi syarat fire rating, sementara Glasswool di lapisan dalam menyerap frekuensi menengah dan tinggi. Namun kombinasi ini harus dirancang berdasarkan target dB dan kondisi konstruksi yang ada, bukan dipilih secara acak.

Berapa ketebalan Rockwool yang dibutuhkan untuk ruang genset?

Tidak ada angka tunggal yang berlaku untuk semua kasus. Ketebalan bergantung pada daya genset dalam kVA, frekuensi dominan mesin, konstruksi dinding yang sudah ada, dan target penurunan dB. Sebagai titik awal, Rockwool density 60-80 kg/m3 dengan ketebalan 50-100 mm sering digunakan, tetapi angka pasti harus ditentukan setelah survei lapangan dan pengukuran baseline kebisingan.

Apakah Glasswool aman digunakan di gedung bertingkat yang mensyaratkan fire rating?

Glasswool bersifat tidak mudah terbakar, tetapi titik lelehnya sekitar 450-500 derajat Celsius, lebih rendah dibanding Rockwool yang melampaui 1000 derajat Celsius. Untuk partisi yang mensyaratkan fire rating 1 jam atau lebih sesuai standar gedung bertingkat, Rockwool umumnya lebih aman dan lebih mudah memenuhi sertifikasi. Periksa spesifikasi fire rating yang dipersyaratkan dalam dokumen bangunan sebelum memilih.

Mengapa material akustik yang sudah dipasang tidak mencapai hasil sesuai spesifikasi?

Penyebab paling umum adalah void pada pemasangan, terutama di titik sambungan, sudut, dan penetrasi kabel atau pipa. Material dengan NRC 0.90 yang dipasang dengan celah 10 persen dari luas permukaan dapat kehilangan 30 persen efektivitasnya. Penyebab lain termasuk density material yang tidak sesuai spesifikasi, flanking path lewat struktur yang tidak ditangani, dan penggunaan material peredam suara udara untuk masalah bunyi yang merambat lewat struktur.

Bagaimana cara mendapatkan rekomendasi material akustik yang tepat untuk proyek gedung di Jabodetabek?

Langkah paling efisien adalah survei lapangan untuk mengukur kondisi baseline kebisingan dan memeriksa konstruksi yang sudah ada. Dewa Peredam Ruangan menyediakan survei gratis di wilayah Jabodetabek. Dari hasil survei, rekomendasi kombinasi material, ketebalan, dan density dapat disusun secara spesifik dan dicantumkan dalam penawaran tertulis. Untuk lokasi di luar Jabodetabek, survei tetap dapat dilakukan dengan biaya mobilisasi yang dicantumkan terbuka dalam penawaran.

Konsultasikan Kebutuhan Material Akustik Proyek Anda

Pemilihan antara Rockwool dan Glasswool bukan keputusan yang bisa diselesaikan hanya dengan membandingkan harga per rol. Density, titik leleh, kapasitas beban struktur, dan syarat fire rating semuanya menentukan apakah material yang dipilih akan mencapai target akustik atau tidak.

Jika Anda sedang menyusun spesifikasi untuk proyek gedung, baik itu ruang genset, auditorium, ruang konferensi, atau plafon perkantoran, survei lapangan adalah langkah pertama yang paling produktif. Dari sana, penawaran tertulis dengan spesifikasi material yang dapat dipertanggungjawabkan dapat disusun.

Konsultasikan kebutuhan material akustik proyek Anda melalui formulir di sini.

Suite 3058, Mula by Galeria Jakarta, Cilandak Town Square

Jl T.B. Simatupang Kav I7, Rt 02/Rw 01, Cilandak Barat, Cilandak, Jakarta Selatan, Jakarta 12430, Indonesia

© 2019 dewaperedamruangan.com All rights reserved